evams®Discuss your project ↗

Budget and analytics

How to calculate an advertising budget and allowable cost per lead

An advertising budget should be calculated from sales economics: how much remains after variable costs, what share can be spent on acquisition and how many enquiries become customers. A fixed percentage of turnover without these data does not show whether promotion will pay for itself.

Below is a calculation sequence for a business that wants to control advertising expenditure. All numerical examples are illustrative: they are not EVAMS client results, market averages or forecasts for a specific campaign. Replace them with your own data to create a working model for a test.

What the full advertising budget includes

The media budget is the amount paid to an advertising platform for placements. The full cost of promotion is broader: it may include setup and management, materials, landing-page development, analytics and additional services. Counting only spending in the advertising account understates the final acquisition cost.

Cost itemHow to include it in the plan
Advertising placementsSeparately by platform and campaign
Specialist workOne-off launch and ongoing management
Photography, video, copy and bannersPre-launch preparation and subsequent updates
Website and analyticsInitial work and support
Services, fees and non-recoverable taxesActual additional expenditure

Show one-off investment and ongoing expenditure on separate lines. The first month may look expensive because of page development, although subsequent months will not require repeating that work. However, initial costs should not be excluded from the overall project assessment either. For management analysis, define in advance the period over which you allocate these costs.

Step 1. Calculate the contribution from one sale before advertising

Start with revenue excluding VAT where applicable and subtract variable costs. For a shop, these may include product purchasing, packaging, payment fees, subsidised delivery and expected return costs. For a service, they may include materials, the provider's work and other costs incurred because of that particular order.

Contribution before advertising = revenue − variable costs excluding advertising

Suppose an order generates €200 in revenue excluding VAT. Variable costs are €120. This leaves €80 before acquisition costs, fixed costs and profit. It is not net profit: rent, management and other fixed expenditure have not yet been covered.

Margin and markup are different measures

If a product is purchased for €100 and sold for €150, the markup is 50%, while the margin as a share of revenue is approximately 33.3%, before other costs. Substituting markup for margin in an advertising budget calculation overstates allowable expenditure. Keep the original amounts in the spreadsheet and calculate the share of revenue explicitly.

Do not stop at the cost of the product. If packaging, fees and delivery leave less, that reduced amount is what remains available for advertising and the rest of the business. Categories with different economics need separate calculations: a shop's average margin can hide unprofitable promotion of a specific product group.

Step 2. Determine the allowable customer acquisition cost

From contribution before advertising, set aside the amount you want to retain to cover fixed costs and profit. The remainder is the acquisition spending limit under the chosen model. This is a management decision, not a universal market benchmark.

Allowable CAC = contribution before advertising − required remaining contribution

In our example, contribution is €80. If €40 must be retained, the allowable total customer acquisition cost is €40. Here, CAC means acquisition expenditure divided by the number of new customers. If a report includes repeat orders, the resulting measure cannot be called the cost of a new customer without qualification.

Define what is included in the numerator. One operational report might measure advertising spend per customer, while another includes the full cost of the team's work. Both measures are useful if correctly named and not substituted for each other. Overall profitability decisions should use the complete model.

Step 3. Convert customer cost into lead cost

For a business where sales follow a call or consultation, you need the conversion rate from enquiry to paid order. Use mature lead cohorts: enquiries that have already had enough time to complete the normal sales cycle.

Allowable CPL = allowable CAC × lead-to-customer conversion rate

If allowable CAC is €40 and two of every ten enquiries become customers, the conversion rate is 20%. The allowable enquiry cost in this model is €8. If only one in ten buys, the limit falls to €4. With the same advertising, the quality of enquiry handling changes the campaign's economics.

Which enquiries belong in the calculation?

Record your definition of a lead. It might be any submitted form or only an enquiry from the correct region with a suitable task. Do not use the cost of all forms while calculating conversion only for selected enquiries: the numerator and denominator would refer to different groups.

Flag duplicates, spam and repeated contacts from the same person separately. If two forms relate to one deal, they should not create the illusion of two independent sales opportunities. With many unsuitable enquiries, calculate both CPL for all leads and the cost of a qualified enquiry.

Step 4. Check sensitivity to the conversion rate

One optimistic scenario is insufficient. Create several alternatives and see whether the budget can withstand weaker performance. In the following table, allowable CAC remains €40; only the enquiry-to-customer conversion rate changes.

Conversion rateEnquiries per customerAllowable CPL
10%10€4
20%5€8
25%4€10

The table is not an advertising-performance forecast; it shows how allowable enquiry cost depends on sales. If conversion is unknown, the first test should help measure it. A desired conversion rate can replace an observed rate only as a hypothesis with explicitly identified risk.

Test other changes too: lower average order value, more returns or higher delivery costs. This reveals which factor has the greatest effect and which data should be clarified first. Improving enquiry handling can sometimes matter more than increasing advertising expenditure.

Step 5. Calculate a monthly plan

Suppose the target is 30 new customers and the lead-to-customer conversion rate is 20%. Around 150 enquiries are then needed. At a target cost of €8 each, acquiring them corresponds to €1,200 of expenditure under the chosen cost definition. This is an arithmetic target, not a guarantee that the market will supply the required volume at that price.

If €1,200 is the total acquisition cost limit and specialists plus materials cost €300, €900 remains for placements. At 150 enquiries, the allowable media cost per lead is €6. Otherwise, additional expenditure will push the project beyond its calculated limit.

Check delivery capacity: can the company serve 30 new customers, how much time will it need and when will payment arrive? If payment comes several weeks later, advertising costs precede revenue. Positive deal economics do not rule out a cash-flow gap.

ROAS: a useful metric with limitations

ROAS measures revenue attributed to advertising relative to advertising spend. For example, €5,000 in revenue from €1,000 of spending gives a ROAS of 5, or 500%. It does not mean €4,000 in profit: product costs, delivery, returns and specialist work have not yet been included.

ROAS = advertising-attributed revenue ÷ advertising expenditure

If contribution before advertising equals 40% of revenue, the threshold for covering advertising expenditure alone is 1 ÷ 0.40 = 2.5. At that ROAS, advertising consumes the entire contribution, leaving nothing for fixed costs and profit. Financial resilience requires an additional buffer whose size depends on the business.

Keep data consistent. Do not compare VAT-inclusive revenue with a margin calculated excluding VAT, or use orders before returns to assess final profitability. Write the calculation rules next to the metric so the report's meaning does not change from month to month.

When to account for repeat purchases

Repeat sales can increase the allowable acquisition cost, but they should be used on the basis of observations. For a new project, unknown future loyalty is not confirmed income. It is safer to assess first-order economics initially and build a separate repeat-purchase scenario.

Where history exists, analyse customer cohorts over equal periods: how much contribution they generated three, six or twelve months after the first purchase. Include retention expenditure, discounts and returns. Total revenue from existing customers in a calendar month is not a substitute for this calculation.

Do not confuse long-term profitability with available cash. Even if a customer pays back over six months, the company needs money for advertising today. The growth limit depends not only on the expected outcome but also on the ability to finance the waiting period.

How to organise a test without arbitrary promises

Before launch, write down the hypothesis, maximum expenditure and assessment criteria. A test may answer a question about the cost of a suitable enquiry or the conversion rate of a specific offer. “Let's try advertising and see” is too vague for a subsequent decision.

Do not set the same duration for every business. If buyers typically take several weeks to decide, assessing sales after two days is premature. However, fix technical errors, broken forms and clearly irrelevant enquiries immediately rather than waiting until the test ends.

  • Stop or fix: the enquiry path is broken, geography is wrong or events are duplicated.
  • Continue gathering data: operations are normal, but the sales cycle has not yet ended.
  • Revise the offer: enquiries arrive, but a particular objection recurs.
  • Consider increasing budget: sales are confirmed and the company can handle more volume.

What data to collect every week

A minimum report should include expenditure by channel, unique enquiries, qualified leads, new sales, revenue and reasons for rejection. Also record changes in conditions: prices, range, discounts, opening hours and delivery times. Otherwise, changes in results can easily be attributed solely to advertising by mistake.

Connect your budget calculation with “Advertising generates enquiries but no sales”, which explains how to identify losses between an enquiry and payment. Before selecting a platform, it is also useful to compare the roles of Google Ads, Meta, TikTok and Criteo.

Frequently asked questions about advertising budgets

What minimum budget is needed to launch?

There is no single reliable amount. It depends on contact cost, the volume of data required, the sales cycle and the scope of work. First define the test question and risk limit, then assess the budget needed.

Can we allocate a fixed percentage of turnover?

You can use it as a financial constraint, but it is insufficient for assessing profitability. With different margins, the same spending percentage produces different results.

When should spending increase?

When results are confirmed, their economics are understood and customer handling quality is maintained. More spending does not guarantee the previous acquisition cost, so scaling needs to be assessed using new data.

EVAMS helps prepare promotion strategies, advertising campaigns and analytics. A meaningful calculation requires your prices, variable costs, enquiry history and actual sales. Without these data, preparing test scenarios is more accurate than promising an exact number of customers.